BLFMP - ACRYSHEEN ACRYLIC, W7000
- MSDS: BLFMP
- Manufacturer: EVR GARD COATINGS CO
- Product Name: ACRYSHEEN ACRYLIC, W7000
- National Stock Number: 8010-00N018156
Product Identification
Product ID:ACRYSHEEN ACRYLIC, W7000
MSDS Date:01/01/1989
FSC:8010
NIIN:00N018156
MSDS Number: BLFMP
Responsible Party
PARAMOUNT, CA 90723
US
Emergency Phone: 213-531-0131
Info Phone: 213-541-0131
Cage: 5G582
Contractor
Telephone: 310-531-0131
Cage: 5G582
Ingredients
01331), VP = 0.1
CAS: 57-55-6
RTECS: TY2000000
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
CAS: 25265-77-4
RTECS: UF6000000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:MAY CAUSE HEADACHE, NAUSEA &
DIZZINESS. SKIN/EYE:PRIMARILY IRRITANT. REDNESS/RASH ON SKIN. WASH
AFFECTED AREAS THORO WITH PLENTY OF WATER. REMOVE CONTAM CLOTHING.
INGEST:NAUSEA, DIZZINESS, HEADA CHES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT WITH MATERIAL MAY
CAUSE DERMATITIS.
First Aid
First Aid:INHAL:REMOVE PATIENT TO FRESH AIR. CALL MD. EYES:FLUSH WITH
PLENTY OF CLEAN WATER FOR AT LEAST 15 MIN. CALL MD. SKIN: REMOVE
SATURATED CLOTHING & WASH SKIN WITH SOAPY WATER THOROUGHLY. CALL
MD. INGEST :INDUCE VOMITING WITH 1-OZ OF SYRUP OF IPECAC FOLLOWED
IN 5 MINUTES WITH GLASS OF WATER. CALL MD.
Fire Fighting
Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WATER-BASED PRODUCT. WILL NOT SUPPORT
COMBUSTION. WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:ABSORB SPILL WITH ABSORBENT MATERIAL -
SAWDUST, SAND, CLAYS, ETC, AND FLUSH SPILL AREA WITH LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PRODUCT IS STABLE UNDER NORMAL USE &
STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED MASKS DURING APPLICATION
TO AVOID EXCESSIVE INHAL OF VAPORS. OPEN WINDOWS & DOORS OR USE
OTHER MEANS TO INSURE FRESH AIR ENTRY DURING APPLICATION & DRYING.
Ventilation:PROVIDE ADEQUATE VENTILATION. INSURE ADEQUATE SUPPLY OF
FRESH AIR.
Protective Gloves:BUNA N GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:MASKS IF NECESSARY TO PROVENT CONTACT.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:1.3
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT & COLORS - SLIGHT AMMONIA SMELL.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & ALKALIS & MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:PLACE HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55-GAL METAL DRUMS & DISPOSE OF IN APPROVED
DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.